A1S Group Evo1-MCP 1, Техническое руководство

Страница: 37 / 84

Back to contents
Dip switch settings
Dip switch
1 25%
50%
75%
100%
2
3
4
Current limit %
The dip switches are used to adjust the
Current required to lift the curtain.
It is important to set the switches correctly, if set too low the
motor will stall, too high the motor will pull the bottom rail off the
curtain when retracted.
Dip Switches
The dip switches on the MCB must be correctly set to suit each curtain, this
is the current limit used to drive the motor which requires setting for the stall
feature of the bottom bar hitting the head box.
Start with dip switch 1 up and the remaining switches down if the curtain will
not lift then push dip switch 1 down and lift dip switch 2, carry out this across
the dip switches until the curtain lifts and by holding against the bottom bar
you are able to stop the motor without too much force being applied.
37