A1S Group Evo1-MCP 1, Техническое руководство

Страница: 49 / 84

Back to contents
Low Battery Hold cycles can be set between 1 and 10 cycles. Increments of one
cycle.
• Press and release the centre button to increase cycles.
• Press and release the left-hand button to decrease the cycles.
• Press and release the right-hand button to move onto the next option.
This must be set 10 seconds greater than the curtain with the longest run time
for the bottom bar to fully retract and hit the head box.
Once the timer has counted down the power to the motor is transferred to the
brake and the motor stall power is switched off.
If set to disabled the motor will remain in stall and the power will not transfer
to the brake unit. This feature is programmed to enable the use of non braked
motors.
• This can be set between Disabled 0 and 600 seconds
• Press and release the centre button to increase the seconds.
• Press and hold the centre button to increase the seconds by 10.
• Press and release the left-hand button to decrease the seconds.
• Press and hold the left-hand button to decrease the seconds by 10.
• Press and release the right-hand button to move onto the next option.
Low battery hold/drop cycles
Curtain open
49