A1S Group Evo1-MCP 1, Техническое руководство

Страница: 43 / 84

Back to contents
Wiring of an access switch
Wiring to the push switch access
or retract
The link wire must be used to power the
override circuits,
Link out Brake in + to ov
Use left hand override terminal
Brown to+ on the override terminal (double
up with the link wire) Blue to In on same
override terminal
Only use the yellow pair of wires (normally
open)
Brown to yellow
Blue to yellow
The curtain retract distance when the Access
switch is being used can be adjusted by the
pot number C30 VR1 on the bottom left of
the MCB.
A fine flat blade jeweller type screwdriver is
required, the adjustment is ¾ of a turn from
minimum to maximum.
The adjustment is very fine and
care must be taken.
43