A.O. Smith Innovo IR 12-160, Инструкция по установке, эксплуатации и обслуживанию

Страница: 19 / 96

3 Interface
3.1 Operator interface
The operator interface consists of:
• a control switch (see 3.1.1) on the left side of the water heater
• 5 push buttons (see 3.1.2) to navigate through the menu
• a LCD-display (see 3.1.3) that shows settings, functions, values and errors.
The operator interface is parameter driven and enables the user to change parameters and
to verify the status and history of the water heater.
Fig. Operator interface
enter reset menu
Innovo
EXT
2
1
1. LCD display
2. Push buttons
3.1.1 Control Switch
With the control switch you can activate and deactivate the controller of the water heater.
Warning
The power of the water heater stays on when the control switch is set to 0.
When the control switch is set to I, the display first shows
ini
for some seconds. After
that, the display shows
OFF
.
Fig. Display
w
0312266_INNOVO_UKUK_ V5.1, 2022-07-12
19