A.O. Smith Innovo IR 12-160, Инструкция по установке, эксплуатации и обслуживанию

Страница: 48 / 96

Parallel and non-concentric systems
Refer to the table for the correct pipe dimensions of the C43, C53 and C63 parallel
systems.
Description Venting material
PP Venting material
Alu
Manufacture venting material Muelink & Grol Muelink & Grol
Construction Parallel Parallel
Material flue gas outlet PP - Temp. Class T120 Thick walled aluminum
Material air inlet
Diameter flue gas outlet
80
+0,6
/
-0,6
mm 80
+0,3
/
-0,7
mm
Diameter air inlet
Refer to C13/C33 parallel systems (see 8.7.2) for the A.O. Smith part numbers. The same
parts can be used for the C43, C53 and C63 parallel systems.
Use the "adapter box concentric to parallel - water heater side" (part number 0312209) for
C63 parallel systems.
8.8 Electrical connections
Warning
Leave the water heater electrically isolated until you are ready to commission it.
Caution
The water heater is phase-sensitive. It is absolutely essential to connect the mains live
(L) to the live of the water heater and the mains neutral (N) to the neutral of the water
heater. The water heater can handle a potential difference between live (L) and neutral
(N), but the potential difference between live (L) and earth has its restrictions, refer to
displayed errors (see 12.1.2), error
F19
.
8.8.1 Preparation
Remove the cover of the water heater to make the electrical section and the terminal block
visible:
1.
Use a hex driver to remove the screw (1) at the cover.
w
c
48 Installation, Maintenance and Service part