User Instructions
Please read the instructions carefully before the installation or operation of this HSE-HNS
heater (henceforth the HSE-HNS water heater will be referred as water heater). This user guide
is meant for your future reference.
?
Only the company recommended professional installers will install the A. O. Smith water
heater for you. In case of improper installation of the water heater by unauthorised
personnel, A. O. Smith will not be responsible.
?
If the users install the water heater manufactured by our company by themselves or do it
by using the self prepared installation materials, our company will not be liable for any
adverse effects on normal operation and service performance of the water heater,
including but not limited to pipeline leakage, fall or improper installation thereof and
harmful effects on or damage to the body of the water heater as well as all losses
incurred thereby.
?
After installation and operation of the water heater, users should inspect the water
heater regularly and make necessary maintenance according to the service conditions.
If any abnormality occurs, stop the operation of the water heater immediately and dial
our Customer Care No.
1.800.103.2468
for repair to ensure the normal, safe and reliable
operation of the water heater.
?
The anode rod is a consumable part and should be examined and replaced at regular
intervals. It is suggested that the longevity is for 2 to 3 years. Consumers should register
and replace the anode rod by dialling our Customer Care No.
1.800.103.2468
. In this
way, the service life of the water heater will be extended effectively.
?
Prior to any maintenance or repair of the water heater, please ensure to cut off the
power. Those installers who are not recommended by A. O. Smith should not adjust or
repair the water heater.
?
In case the water heater is subject to dry heating, the generated steam or burning water
might lead to serious scald. Therefore, it is necessary to fill the water heater with water. If
dry heating occurs, cut off the power and water supply at once, stop the operation, dial
the Customer Care No.
1.800.103.2468
and carry out inspection or repair by our
company recommended professional installers.
?
This water heater is provided with power cord, if any damage is observed before
installation, contact our Customer Care No.
1.800.103.2468
. (Primary components of the
water heater are protected by insulation layer and thermal protective coating so that the
users can operate with ease).
?
This water heater is equipped with relief valve. For the sake of safe operation, the
mounting position of the valve should not be changed without permission and the
blockage of valve outlet is strictly prohibited. The discharge pipe must be provided for
the relief valve, mounted downwards continuously and should not be knotted in the
middle. The discharge pipe shall be directly connected to the floor drain.
?
Before installing the water heater, confirm that the power of water heater matches its
electric meter capacity and power wire.
?
This water heater should be earthed reliably. It is prohibited to connect the earth wire to
neutral wire or tap water pipe.
?
If the temperature has been set and the relief valve has been installed by the
manufacturer, for the sake of safe operation, users may not alter the installation location
or block its outlet without permission.
?
Hot water above 50°C could result in scald. Before using hot water, please pay attention
to testing water temperature by hand and use water at an appropriate temperature by
mixing cold water.
water
1
Содержание HSE-HNS
Страница 23: ......
