14
Troubleshooting
Problem
Possible causes
Corrective action
• No display
heater
• No hot water
2) No power in electric socket
2) Check power socket
3) Failure in control circuit
3) Call Customer Care Centre
or internal wiring
• No display
1) High temperature limit
1) Switch off power supply
• High water
switch open
2) Call Customer Care Centre
temperature
2) Electrical circuit failure
• Display, no
Heating elements or
Call Customer Care Centre
hot water
internal circuit failure
• Drip from
Unsealed joints
Reconnect pipes of water
pipe joints
heater and be sure to use
seal tape
• Drip from
1) Tank or accessories leakage
1) Disconnect power to
enclosure
2) Drain blocked
heater immediately
3) Condensate pipe distorted
2) Check & make condensate
or not downward facing
pipe downwards
3) Call Customer Care Centre
• Display ”E1”
Black wire of two-core terminal
Call Customer Care Centre
open circuit or short circuit
• Display ”E2”
White wire of two-core terminal
Call Customer Care Centre
open circuit or short circuit
• Display ”E6”
Red wire of two-core terminal
Call Customer Care Centre
open circuit or short circuit
• Display ”E7”
Blue wire of two-core terminal
Call Customer Care Centre
open circuit or short circuit
• Display ”E3”
Ultra High temperature
Call Customer Care Centre
• Display ”E5”
Low voltage protection
Call Customer Care Centre
• Display “EA”
The relay breakdown
1) Switch off power supply
2) Call Customer Care Centre
1) No power to heater
1) Switch on power to
Note:
Call Customer Care Centre on
1.800.103.2468
Содержание HSE-HNS
Страница 23: ......