A.O. Smith HSE-HNS, Руководство пользователя

Страница: 10 / 24

Mounting guidelines
Drill two holes in 90 mm depth at least by using an electric impact drill with a ø10 mm bit.
The holes must be in level. Space between the two holes should be as shown in Fig. 2 based on
the model.
Fig. 2 Mounting distance of hangers
HSE-HNS-060
198mm 375mm
HSE-HNS-080
375mm
HSE-HNS-050
Fig. 3 Installation of mounting bracket Fig. 4 Mounting of the water heater
Wall
Fig. 5 Installation of mounting bracket
Caution: The provided mounting accessories can only be used for solid wall, as shown in
Fig. 5. Improper installation may cause the water heater to fall down.
Caution:
• Nylon expansion tube must pass through the hole of the mounting bracket first,
and then be inserted into the drilled holes.
• It is necessary to use special inner hexagon spanner to fasten the bolts into the
nylon expansion tubes, no other tools are permitted. During fastening of the
screws, ensure that the counter sunk head of the screw is not excessively tightened,
which may damage the nylon expansion tubes.
Proper Improper
7
• Fix the hangers on the wall by using the inner hexagon spanner and expansion screws
(Fig. 3).
• Insert the square holes on the upper of supporting rack at the back of the water heater
into the hanger of the hanging plate, move down the water heater to ensure the square
holes against the root of the hanger. Confirm the reliable fixing of the water heater
(Fig. 4).