Showmaster Overview
Medialon Showmaster User Manual
p 33 of 42
M569-3 | June 2023
2.5.5
Mounting
The Showmaster Go can be mounted singly or in multiples up to three per rack unit. The available
mounting options are VESA, an anti-shock mounting frame, and a rack mounting tray. All are
available options from Medialon.
When mounting the Showmaster Go, do not block any server air vents, and ensure the ambient
temperature around the server is compatible with the environmental characteristics stated.
Particularly when mounted in a rack cabinet with front or rear doors, the ambient temperature
around the server may be higher than the ambient room temperature.
Showmaster Go can be mounted vertically using the optional VESA mounting plate or anti-shock
frame, but care must be taken that hot air from the rear panel is not drawn back in at the front. Do
not mount with the front panel uppermost.
•
See document
M555 Mounting the Medialon Showmaster Go
for full details with illustrations.
2.5.6
Technical Specifications
USB ports
3 × USB 2.0 (Type-A), 1 × USB 3.1 (Type-C)
Power connection
12-19 VDC, 60 watts max; DC power inlet clip
Ethernet
2 × 10/100/1000 base-T
Video output
4 × DisplayPort™ 1.2
GPIO
3 × opto-isolated (0-3.5 V TTL)
Mounting options
VESA mount; rackmount tray (takes 1-3 units); anti-shock frame;
Kingston Safe Lock
Dimensions (W × L × H) 145 mm × 152 mm × 44 mm (5-3/4” × 6” × 1-3/4”)
Weight
1.4 kg (3 lbs)
Technical specifications are subject to change without prior notice. Please check
Approvals and Environmental Information
Federal Communications Commission (FCC Statement)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not