Showmaster Overview
Medialon Showmaster User Manual
p 34 of 42
M569-3 | June 2023
installed and used in accordance with this user guide, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at their own expense.
European Union
This is a Class A product. In a domestic environment, this product may cause radio interference,
in which case the user may be required to take adequate measures.
FCC and EU responsible:
7thSense Design Ltd
4207 Vineland Rd.
Suite M1
Orlando, FL 32811
USA
T: +1 407 505 5200
Please refer to document
M557 Showmaster Go Hardware User Guide
supplied with your unit.
2.5.7
Environment
General
Showmaster Go is intended for use in a commercial (not domestic) environment and should be
operated in a clean, dust free area (e.g. a server room).
The unit is intended for operation in benign environments; that is, not subject to corrosive or
explosive atmospheres, moisture or flammable gases. The unit is non-protected against ingress
of liquid (IPx0). The unit is not designed to be subject to excessive mechanical shock or vibration.
For environments with some movement and vibration, an anti-shock frame mount is available for
single units.
Only used at altitude
not
exceeding 2000 m
Only used in not-tropical
climate regions
Thermal
Do not block any of the unit’s air vents and ensure the ambient temperature around the unit is
compatible with the environmental characteristics stated on the back page of this manual.
Particularly when mounted in a rack cabinet with front or rear doors the ambient temperature
around the unit may be higher than the ambient room temperature.
Showmaster Go can be mounted vertically using the optional VESA mounting plate, but
care must be taken that hot air from the rear panel is not drawn back in at the front. Do not
mount with the front panel uppermost.
