4RF Aprisa XE, Руководство пользователя

Страница: 52 / 272

Managing the terminal | 51
7. Managing the terminal
The command line setup menu can be used to:
ƒ Provide basic access to the terminal to set IP addresses
ƒ Check or set basic settings of the terminal
4RF SuperVisor is an embedded element manager for the Aprisa XE terminal which is used to:
ƒ Configure radio and interface parameters
ƒ Setup cross connections between traffic interfaces
ƒ Monitor performance, terminal status and alarm details
The setup menu
1.
Initiate the link by either applying power to the terminals or, if the terminals are already powered
up, pressing the Enter key.
2.
At the prompt, enter your selection:
Selection Explanation
1) Dump terminal
configuration
This shows basic terminal data such as ID, IP data, TX and
RX frequency.
2) Use DHCP configuration This deletes any preset IP addresses and looks for a new
address via DHCP.
3) Configure IP addresses Use this if you want to set the IP address of the local terminal.
4) Configure SNMP Use this to set the SNMP community string.
5) Set hostname Use this to set a name that can be used in conjunction with
DNS.
6) Configure remote
terminal address
Use this to set the IP address of the remote terminal.
7) Reset web server users Restores all the default web usernames and passwords.
8) Reset to defaults Resets all the configurable terminal settings (such as
frequencies, power, IP settings SNMP settings) to pre-defined
defaults. This means that when the terminal restarts, the link
will be lost.
9) Reboot Reboots the terminal.
10) Configure Ethernet Use this to reset the Ethernet configuration to the default
settings, and display the Ethernet configuration.
11) Password Protect Menu Use this to password-protect the menu to prevent
unauthorized users from modifying terminal settings. The
password is setupxe.