4RF Aprisa XE Скачать руководство пользователя страница 189

Страница: 189 / 272

Maintenance | 188

Changing the status of an image file

To change the status of an image:

Select Link or Local or Remote > Maintenance > Image Table.

Select the image you wish to change and click Edit.

On the Image Details, select the status from the Command drop-down list and click Apply.

Status Function

Active

The image is currently being used by the system.

Inactive

The image is not currently being used by the system and could be deleted.

Selected

The image is not currently being used by the system but has been
activated and will become active following a terminal reboot.

Current (deselected)

The image is currently being used by the system but as another image has
been selected, it will become inactive following a terminal reboot.

Содержание Aprisa XE

















































































































































































































































































Результаты поиска

Содержание Aprisa XE

Отзывы:

Бренды по названию

Популярные бренды

4RF Aprisa XE, Руководство пользователя

Результаты поиска

Содержание Aprisa XE

Отзывы:

Бренды по названию

Популярные бренды