4IPNET WHG201 Скачать руководство пользователя страница 73 | Manualshive

Страница: 73 / 154

background image

72

User Manual ENGLISH

WHG-Series Wireless WLAN Controller

Copyright © 2017, 4ipnet, Inc. All rights reserved. All other trademarks mentioned are the property of their respective owners.

Traffic Direction for Idle Timeout: The user’s activity inspection may be checked as uplink or both.
Threshold for Idle Traffic Detection: Designate the threshold where traffic flow smaller than the value
configured will be considered as being idle.
Charge Traffic to/from Host in Walled Garden List: For usage or volume type accounts in the On-Demand
user database, administrator has the option to charge or not charge visits to websites that are listed in the
walled garden or walled garden ad list.
Kick out user when user’s IP change: An option for the administrator whether or not disconnection is
forced by the system whenever a user changes IP address.
Log NAT Mapped in User Session Log: To show mapping for each connection from Private IP/Port to Public
IP/Port, this option must be enabled.

Built in RADIUS Server Settings
Session Timeout: For created sessions generated by users authenticated via build-in RADIUS server (could
be account roaming user), the timeout range may be configured here manually. Please configure this
attribute carefully.
Idle Timeout: For users authenticated via build-in RADIUS server (could be account roaming user), the idle
timeout range may be configured here manually. Please configure this attribute carefully.
Interim Update: For users authenticated via build-in RADIUS server (could be account roaming user), the
accounting interval may be configured here manually. Please configure this attribute carefully.
Certificate: Certificate for built-in RADIUS server will be selectable

Remaining Quota Reminder
Time and Cut-off reminder: This is the option for the system to display a warning message to On-Demand
users that their time based account quota is about to run out.
Volume Reminder: This is the option for the system to display a warning message to On-Demand users
that their volume based account quota is about to run out.
Reminder Refresh Time: The Login Success page with the remaining quota can set to refresh every
10/15/20 minutes to show the updated remaining quota.

MAC Access Control List
Please refer to “

session 6.2.5 MAC Access Control List

”

«
...
71
72
73
74
75
...
»

Содержание WHG201



























































































































































Отзывы:

Нет отзывов

Похожие инструкции для WHG201

Бренд: IFM Electronic Страницы: 9

Бренд: Extron electronics Страницы: 23

Бренд: Exsys Страницы: 27

Бренд: Intel Страницы: 72

Бренд: NETGEAR Страницы: 10

BEST Wi-Q WQXM-PG

Бренд: Dormakaba Страницы: 51

WiSenMeshWAN 6003

Бренд: Wisen Страницы: 11

Бренд: Quark-Elec Страницы: 7

Бренд: AMX Страницы: 2

Бренд: Juniper Страницы: 26

Бренд: 2Wire Страницы: 82

Бренд: SAGEMCOM Страницы: 29

Mediola iQontrol Gateway

Бренд: Kaiser Nienhaus Страницы: 4

Бренд: Gempro Technology Страницы: 21

Бренд: Appareo Страницы: 9

Бренд: Daikin Страницы: 44

Бренд: Milesight Страницы: 23

Бренд: EnGenius Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды