VISIX S-Series Network Camera
|
USER MANUAL v6.0
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
85
Figure 6-44
Time Sync Manually
Select the Time Zone
c.
Purpose:
When the camera is taken to another time zone, you can use the
Time Zone
function to adjust the time. The time will be adjusted according to the original time and the
time difference between the two time zones.
d.
From the
Time Zone
dropdown menu as shown in Figure 6-45, select the Time Zone in
which the the camera resides.
Figure 6-45
Time Zone Settings
Configuring DST (Daylight Saving Time)
e.
Purpose:
Daylight Savings Time (DST) is a way of making better use of the natural daylight
by setting your clock forward one hour during the summer months, and back again in the
fall.
f.
If your country observes Daylight Savings Time, turn this function on. The time will be
adjusted automatically on DST.
Steps:
1.
Enter the DST interface: Configuration > Advanced Configuration >
System > DST
Figure 6-46
DST Settings
2.
Toggle the
Enable DST
checkbox to enable the DST function.
3.
Set the date of the DST period.
4.
Click
to save the settings.
Configuring RS-232
The RS-232 port can be used in two ways:
Parameters Configuration:
Connect a computer to the camera through the serial port. Device parameters
can be configured by using software such as HyperTerminal. The serial port parameters must be the same
as the serial port parameters of the camera.
Transparent channel:
Connect a serial device directly to the camera. The serial device will be controlled
remotely by the computer through the network.
NOTE:
RS-232 function varies depending on different speed dome models.
Steps: