3xLogic VX-2M-D2-RIA Скачать руководство пользователя страница 30

Страница: 30 / 92

VISIX S-Series Network Camera

USER MANUAL v6.0

10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC

System Configuration

5.1

Storage Settings

Before you start:

To configure recording settings, make sure that you have the network storage device within the network or

the memory card inserted in your camera. IF the camera is interfaced with VIGIL Server, footage recorded by

the VIGIL Server will be stored on the VIGIL Server’s media drive.

CONFIGURING RECORDING SCHEDULE

Purpose:

There are two kinds of recording for the camera: manual recording and scheduled recording. In this section,

follow the instructions to configure scheduled recording. By default, files recorded via scheduled recording are

stored in the memory card (if supported) or on the network disk. If interfaced with a VIGIL Server, recorded

files will be stored in the VIGIL Server’s media drive.

Steps:

Enter the Record Schedule settings interface:

Configuration > Storage > Schedule Settings > Record

Schedule

Figure 5-1

Recording Schedule Interface

Toggle the

Enable

checkbox to enable scheduled recording.

To set advanced settings, click

to enter the advanced settings interface.

Figure 5-2

Record Parameters



Pre-record:

The time you set to start recording before the scheduled time or event. For example, if an

alarm triggers recording at 10:00, and the pre-record time is set as 5 seconds, the camera starts to

record at 9:59:55.

The pre-record time can be configured as No Pre-record, 5 s, 10 s, 15 s, 20 s, 25 s, 30 s or not limited.

NOTE:

The pre-record time changes according to the video bitrate.

Содержание VX-2M-D2-RIA





























































































Результаты поиска

Содержание VX-2M-D2-RIA

Отзывы:

3xLogic VX-2M-D2-RIA, Руководство пользователя, Страница: 30 / 92

Результаты поиска

Содержание VX-2M-D2-RIA

Отзывы: