VISIX S-Series Network Camera
|
USER MANUAL v6.0
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
62
Figure 6-3
DynDNS Settings
NO-IP:
Steps:
a.
Enter Server Address of NO-IP.
b.
In the
Domain
text field, enter the domain name obtained from the NO-IP website.
c.
Enter the
Port
of the NO-IP server.
d.
Enter the
User Name
and
Password
registered on the NO-IP website.
e.
Click
to save the settings.
Configuring PPPoE Settings
Purpose:
If you have only a modem with no router, you can use the Point-to-Point Protocol over Ethernet (PPPoE)
function.
Steps:
1.
Enter the PPPoE settings interface: Configuration > Network > Basic Settings >
PPPoE
Figure 6-4
PPPoE Settings
2.
Toggle the
Enable
PPPoE
checkbox to enable this feature.
3.
Enter
User Name
,
Password
, and
Confirm
password
for PPPoE access.
NOTE:
The User Name and Password should be assigned by your ISP.
Warning:
For your privacy and to better protect your system against security risks, we strongly recommend
the use of strong passwords for all functions and network devices. The password should be
something of your own choosing (using a minimum of 8 characters, including upper case letters,
lower case letters, numbers and special characters) in order to increase the security of your
product.
Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.