VISIX S-Series Network Camera
|
USER MANUAL v6.0
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
61
DNS server settings are required for some applications (e.g., sending email). Be sure to properly configure
the
Preferred DNS Server
and
Alternate DNS server
settings.
Figure 6-2
DNS Server Settings
NOTE:
The network router must support the route advertisement function if you select
Route
Advertisement
as the IPv6 mode.
Configuring DDNS Settings
Purpose:
If your camera is set to use PPPoE as its default network connection, you can use Dynamic DNS (DDNS) for
network access.
Before you start
:
Registration on the DDNS server is required before configuring the DDNS settings of the camera.
Warning:
For your privacy and to better protect your system against security risks, we strongly recommend the
use of strong passwords for all functions and network devices. The password should be something of
your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters,
numbers and special characters) in order to increase the security of your product.
Proper configuration of all passwords and other security settings is the responsibility of the installer
and/or end-user.
Steps:
1.
Enter the DDNS settings interface: Configuration >
Network > Basic Settings > DDNS
2.
Toggle the
Enable
DDNS
checkbox to enable this feature.
3.
Select
DDNS Type
. Two DDNS types are available: DynDNS and NO-IP.
DynDNS:
Steps:
(1)
Enter Server Address of DynDNS (e.g. members.dyndns.org).
(2)
In the Domain text field, enter the domain name obtained from the DynDNS website.
(3)
Enter the Port number of the DynDNS server.
(4)
Enter the User Name and Password registered on the DynDNS website.
(5)
Click
to save the settings.