VISIX S-Series Network Camera
|
USER MANUAL v6.0
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
45
Figure 5-21
Audio Exception Detection
2.
Toggle the
Audio Loss Detection
checkbox to enable the audio input exception detection.
3.
Toggle the
Sudden Increase of Sound Intensity Detection
checkbox to enable sudden rise detection.
Sensitivity
: Range [1-100]. Smaller values will require a more severe sound change to trigger
detection.
Sound
Intensity
Threshold
: The sound intensity range is [1-100]. The louder the environment, the
higher the value should be.
4.
Toggle the
Sudden Decrease of Sound Intensity Detection
checkbox to enable the sudden drop
detection.
Sensitivity
: Range [1-100]. Smaller values will require a more severe sound change to trigger
detection.
5.
Click the
tab to enter the arming schedule setting interface. The time
schedule configuration is identical to configuring an arming schedule for motion detection. Refer to
Section
5.2.1 Configuring Motion Detection
for more details.
6.
Click the
tab to select the linkage method taken for the audio input exception.
Available linkages include Notify Surveillance Center, Send Email, Trigger Alarm Output and Trigger
Recording. Refer to
Section
5.2.1 Configuring Motion Detection
.
7.
Click
to save the settings.
CONFIGURING FACE DETECTION
Purpose:
After face detection is enabled, when a face appears in the surveillance area, it can be detected by the camera.
Certain actions may be triggered by the detection.
Steps:
1.
Toggle the
Enable Face Detection
checkbox.
2.
(Optional) The user can toggle the
Enable Dynamic Analysis for Face Detection
checkbox if you want the