manualshive.com logo in svg

3Ware 720-0186-00, Руководство пользователя

Поделиться
Скачать
3Ware 720-0186-00 Скачать руководство пользователя страница 82

Chapter 2. CLI Syntax Reference

75

3ware SAS/SATA RAID Controller CLI Guide, Version 9.5.1

 

/c

x

/u

x

 show

This command shows summary information about the specified unit 

/c

x

/u

x

. If 

the unit consists of sub-units, as in the case of RAID-10 and RAID-50, then 
each sub-unit is further presented. If the Auto-Carving policy was on at the 
time the unit was created and the unit is over the carve size, multiple volumes 
were created and are displayed at the end of the summary information. 
Similarly, if the unit was created using the 3ware BIOS utility 3BM and a size 
was entered in the Boot Volume Size field, multiple volumes were created and 
will be displayed. Note that a volume created using the Boot Volume Size 
feature does not have to be used as a boot volume.  

Note:

 In the output of unit information tables that follows, the column “Port” 

may be “VPort” depending on the applicable controller.

Example for 9690SAcontrollers:

 //localhost> /c0/u1 show

 Unit     UnitType  Status         %RCmpl  %V/I/M  VPort  Stripe  Size(GB)
 ------------------------------------------------------------------------
 u1       RAID-0    OK             -       -       -     64K     3576.06   
 u1-0     DISK      OK             -       -       p0    -       298.01    
 u1-1     DISK      OK             -       -       p1    -       298.01    
 u1-2     DISK      OK             -       -       p2    -       298.01   
 u1-3     DISK      OK             -       -       p3    -       298.01    
 u1-4     DISK      OK             -       -       p4    -       298.01    
 u1-5     DISK      OK             -       -       p5    -       298.01    
 u1-6     DISK      OK             -       -       p6    -       298.01    
 u1-7     DISK      OK             -       -       p7    -       298.01 
 u1-8     DISK      OK             -       -       p8    -       298.01  
 u1-9     DISK      OK             -       -       p9    -       298.01  
 u1-10    DISK      OK             -       -       p10   -       298.01   
 u1-11    DISK      OK             -       -       p11   -       298.01    
 u1/v0    Volume    -              -       -       -     -       2047.00   
 u1/v1    Volume    -              -       -       -     -       1529.06

Example for 9650SE and earlier controllers:

 //localhost> /c0/u0 show

 Unit     UnitType  Status         %RCmpl  %V/I/M  Port  Stripe  Size(GB)
 ------------------------------------------------------------------------
 u0       RAID-50   OK             -       -       -     64K     596.05    
 u0-0     RAID-5    OK             -       -       -     64K     -         
 u0-0-0   DISK      OK             -       -       p0    -       149.10    
 u0-0-1   DISK      OK             -       -       p2    -       149.10    
 u0-0-2   DISK      OK             -       -       p3    -       149.10    
 u0-1     RAID-5    OK             -       -       -     64K     -         
 u0-1-0   DISK      OK             -       -       p4    -       149.10    
 u0-1-1   DISK      OK             -       -       p5    -       149.10    
 u0-1-2   DISK      OK             -       -       p6    -       149.10

 //localhost> /c0/u1 show

 Unit     UnitType  Status         %RCmpl  %V/I/M  Port  Stripe  Size(GB)
 ------------------------------------------------------------------------
 u1       RAID-0    OK             -       -       -     64K     3576.06   
 u1-0     DISK      OK             -       -       p0    -       298.01    
 u1-1     DISK      OK             -       -       p1    -       298.01    

Содержание 720-0186-00








































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды