manualshive.com logo in svg

3Ware 720-0186-00, Руководство пользователя

Поделиться
Скачать
3Ware 720-0186-00 Скачать руководство пользователя страница 54

Chapter 2. CLI Syntax Reference

47

3ware SAS/SATA RAID Controller CLI Guide, Version 9.5.1

 

p4     OK               u0     931.51 GB   1953525168    3QJ0392E            
p5     OK               u0     931.51 GB   1953525168    GTA000PAG67AGA      
p6     DEGRADED         u0     931.51 GB   1953525168    3QJ01PG6            
p7     OK               -      931.51 GB   1953525168    GTA000PAGE1RSA      
p8     NOT-PRESENT      -      -           -             -
p9     NOT-PRESENT      -      -           -             -
p10    NOT-PRESENT      -      -           -             -
p11    NOT-PRESENT      -      -           -             -
p12    NOT-PRESENT      -      -           -             -
p13    NOT-PRESENT      -      -           -             -
p14    NOT-PRESENT      -      -           -             -
p15    NOT-PRESENT      -      -           -             -

Name  OnlineState  BBUReady  Status    Volt     Temp     Hours  LastCapTest
---------------------------------------------------------------------------
bbu   On           Yes       OK        OK       OK       0      xx-xxx-xxxx 

 

/c

x

 show alarms [reverse]

Asynchronous event notifications (also referred to as AENs or alarms) are 
originated by firmware or SES attached enclosure (9690SA only) and 
captured by their respective device drivers. These events reflect warnings, 
debugging, errors, and/or informative messages for the end user. These events 
are kept in a finite queue inside the kernel, awaiting extraction by user space 
programs such as CLI and/or 3DM. They are also stored in the operating 
system events log.

The 

/c

x

 show alarms

 command displays all available alarms on a given 

controller. The default is to display the alarms in ascending order—that is, the 
oldest alarm messages appear at the top, and the most recent alarm or AEN 
messages appear at the bottom. You can use the [

reverse

] attribute to display 

the most recent alarm or AEN message at the top. 

Alarms generated on 7000/8000 series controllers do not have dates, so you 
will see a '-'  in the Date column. This means that it is not applicable. In 
addition, alarm messages on 7000/8000 controllers contain the severity in the 
message text, so the Severity column also shows a '-'.

Example:

 Typical output looks like:

 //localhost> /c1 show alarms

 Ctl  Date                        Severity  Alarm Message
 ---------------------------------------------------------------------------
 c0   [Fri Mar 21 2008 14:19:00]  WARNING   Drive removed: port=1
 c0   [Fri Mar 21 2008 14:19:00]  ERROR     Degraded unit: unit=1, port=1
 c0   [Fri Mar 21 2008 14:19:25]  INFO      Drive inserted: port=1
 c0   [Fri Mar 21 2008 14:19:25]  INFO      Unit operational: unit=1
 c0   [Fri Mar 21 2008 14:28:18]  INFO      Migration started: unit=0
 c0   [Sat Mar 22 2008 05:16:49]  INFO      Migration completed: unit=0
 c0   [Tue Apr 01 2008 12:34:02]  WARNING   Drive removed: port=1
 c0   [Tue Apr 01 2008 12:34:22]  ERROR     Unit inoperable: unit=1
 c0   [Tue Apr 01 2008 12:34:23]  INFO      Drive inserted: port=1
 c0   [Tue Apr 01 2008 12:34:23]  INFO      Unit operational: unit=1

Содержание 720-0186-00








































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды