Chapter 2. CLI Syntax Reference
33
3ware SAS/SATA RAID Controller CLI Guide, Version 9.5.1
/c
x
del selftest=
slot_id
(9000 series)
/c
x
set exportjbod=on|off (9000 series)
/c
x
set ondegrade=cacheoff|follow (9500S only)
/c
x
set spinup=nn (9000 series)
/c
x
set stagger=nn (9000 series)
/c
x
set autocarve=on|off (9000 series SX/SE/SA only)
/c
x
set carvesize=[1024...2048] (9000 series SX/SE/SA only)
/c
x
set rebuild=enable|disable|1..5 (9000 series)
/c
x
set autorebuild=on|off (9000 series SX/SE/SA only)
/cx set autodetect=on|off disk=<p:-p>|all
/c
x
set verify=enable|disable|1..5 (9000 series)
/cx set verify=advanced|basic|1..5 (9000 series SE/SA only)
/cx set verify=basic [pref=ddd:hh] (9000 series SE/SA only)
/c
x
set selftest=enable|disable [task=UDMA|SMART](9000
series)
/c
x
flush
/c
x
update fw=
filename_with_path
[force] (9000 series)
/c
x
commit (Windows only. Also known as shutdown)
/c
x
start mediascan (7000/8000 only)
/c
x
stop mediascan (7000/8000 only)
/c
x
rescan [noscan]
/c
x
show
This command shows summary information on the specified controller /c
x
.
This information is organized into a report containing two to three parts:
•
A
Unit
summary listing all present units
•
A
Port
summary section listing of all ports (or virtual ports) and disks
attached to them.
•
A
BBU
summary section listing, if a BBU is installed on the controller.
The
Unit
summary section lists all present unit and specifies their unit
number, unit type (such as RAID 5), unit status (such as INITIALIZING), %R
(percent completion of rebuilding), % V/I/M (percent completion of
verifying, initializing, or migrating), stripe size, size (usable capacity) in
gigabytes or terabytes, and the auto-verify policy status (on/off)
Possible unit statuses include OK, RECOVERY, INOPERABLE,
UNKNOWN, DEGRADED, INITIALIZING, INIT-PAUSED, VERIFYING,
VERIFY-PAUSED, REBUILDING, REBUILD-PAUSED, MIGRATING, and
MIGRATE-PAUSED. Definitions of the unit statuses are available in the
3ware SAS/SATA RAID Software User Guide, Version 9.5.1
.
