Help Commands
www.3ware.com
122
Help with specific commands
If you enter the help command at the top level, you are considered to be in the
Shell Object, and the help command will provide help on the Shell commands
focus, show, flush, rescan, and commit. Using the help command on objects
(such as
/c
x
, /c
x
/u
x
, /c
x
/p
x
, /c
x
/bbu, /e
x
, /e
x
/slot
x
, /e
x
/fan
x
,
and
/e
x
/temp
x
),
displays all possible sub-commands associated with the object.
For example: help on the controller object
/cx
,
will display all the sub-
commands associated with the controller
/cx
, like this:
//localhost> help /cx
/cx show
/cx show
attribute
[
attribute
...] where attribute is:
achip|allunitstatus|autocarve(9KSX/SE/SA)
|bios|driver|firmware|autorebuild(9KSX/SE only)
|carvesize(9KSX/SE/SA|drivestatus[pause[lines=n]]|
ctlbus(9KSX/SE/SA)|memory|model|monitor|numdrives|
numports|numunits|unitstatus|ondegrade(9500S only)|
pcb|pchip|serial|spinup|stagger
/cx show all where all means Attributes and configurations.
/cx show diag
/cx show
/cx show rebuild (9000 series)
/cx show verify (9000 series)
/cx show selftest (9000 series)
/cx show phy (9690SA only)
/cx show dpmstat [type=<inst|ra|ext>]
(9000 series for type=inst and type=ra; 9KSE/SA
for type=ext)
/cx add type=<
RaidType
> disk=<
p:-p..
> [stripe=<
Stripe
>]
[noscan][nocache]
[group=<3|4|5|6|7|8
|9|10|11|12|13|14|15|16>]
(group=13-16 9690SA only)[name=string (9000 series)]
[ignoreECC][autoverify][noqpolicy][v0=n|vol=a:b:c:d]
(n,a,b,c,d = size of volume in GB) (9000 series)
[storsave=<protect|balance|perform>(9KSX/SE/SA)
[rapidrecovery=(all|rebuild|disable)] (9KSE/SA only)
RaidType={raid0, raid1, raid5, raid10, raid50, single,
spare, raid6 (9650SE and 9690SA)}
/cx add rebuild=
ddd:hh:duration
(9000 series)
/cx add verify=
ddd:hh:duration
(9000 series)
/cx add selftest=
ddd:hh
(9000 series)
/cx del rebuild=
slot_id
(9000 series)
/cx del verify=
slot_id
(9000 series)
/cx del selftest=
slot_id
(9000 series)
/cx set ondegrade=cacheoff|follow (9500S only)
/cx set spinup=
nn
(9000 series)
/cx set stagger=
nn
(9000 series)
