4.4 Scan Options and Settings
Scan
settings frame contains parameters activated with the buttons on the right:
•
Show scan timer
- The scan timer is displayed
during the scanning process in the upper left
corner of the window.
•
Show 3D image count
- Shows the number of
taken images during scanning.
•
Use automatic bite alignment
- The system
automatically attempts to align the bite after
each bite scanning.
•
Use sound effects
- A selectable sound is
played back when the scan data is being
acquired. The sound indicates an optimal data
capture. The preferred sound can be selected in
the Sound Effect drop-down menu (and the
sound can also be played using the Play
Selected Sound button).
•
Default scan zoom level
- Allows you to
adjust the default zoom level for scanning.
•
Non-preparation post processing
- Sets the
precision level of the models without
preparation. Applies to antagonist and study
orders.
•
Hole close color
- Select the color shade to
indicate closed holes on the model.
•
Highlight closed holes on margin line
-
Closed holes on the margin line are highlighted.
•
Send scan videos to distributor
-
Automatically sends scan videos to distributor
when enabled.
•
Calibrate Scanner
- Allows you to calibrate
chapter for details.
•
Reset to defaults
- Resets all settings to the
factory default values.
55
