3.3.3 General Scanning Tools
General scanning tools are located in the toolbar at the bottom of the screen:
•
- Used to mark prepared teeth for further post-processing once
scanning is completed.
•
High resolution
- Captures areas that are difficult to scan, with higher amount of
details.
Follow these instructions to use the
High res
feature:
1. Scan with normal resolution.
2. Inspect the scan and determine where high resolution is required.
3. Set to
High res
. Note, that high resolution can only be applied to a region around a
preparation mark
4. Re-scan the desired area.
5. Turn off
High res
if continued scanning is needed.
•
Trim
- Provides tools for cleaning and trimming the scan:
o
All patches
- Automatically removes all "islands" and "peninsulas"
having slim attachment to the main surface e.g., accidentally scanned
fingers and the tongue.
Before
After
o
Patch -
Manual removal of “island” surfaces. Remove a small area
disconnected from the largest surface by tapping it once.
25
