User manual
25
www.3onedata.com
6.3.3 Port rate-limit
This device provides port speed limits, including entry and exit speed limits. Users can limit the
communication flow of each port or cancel the port traffic limit. Users can select a fixed speed, its scope in
0kbps~ 1000Mbps (Gigabit), the device will according to whether the flow control is enabled to decide is
to drop the message or the use of flow control to limit the transmission speed of end equipment or
receiving speed.
In the menu bar, click on the "main menu", "port configuration", "port rate-limit", enter the port speed limit
configuration interface.
(Figure 6.3.3 )
The device provides a rate limit of two directions, in which the inlet velocity is the actual rate of flow from
the PC and other devices to the switch port. Exit speed is the actual speed between the switch port and
the flow of the device. If at the same time limit the inlet velocity and outlet velocity between the two
devices, the actual speed is smaller.
Port speed limit configuration step:
Step 1: in the input rate of the text box to fill in the input rate value, the range is 0-1000000;
Step 2: in the input burst of the text box to fill in the input burst value, the range is 0-1000000;
Step 3: in the output rate of the text box to fill in the output rate value, the range is 0-1000000;
Step 4: in the output burst of unexpected text box to fill in the output burst value, the range is 0-1000000;
Step 5: click the "Apply" button.