User manual
18
www.3onedata.com
6.2.6 Telnet configuration
Enable TELNET services, TELNET terminal can be connected to the switch through the use of Telnet PC
program.
In the menu bar, click on the "main menu", "system configuration", "TELNET configuration", enter the
TELNET configuration interface.
(Figure 6.2.6.1)
The terminal is connected to the switch by Telnet using the PC program, which is required to have the
following conditions:
1, enable switch TELNET services
2, know the IP address of the switch equipment, can be modified to obtain (in the system management
view can use the IP command);
3, if connected to the PC terminal and the switch port within the same local area network (LAN), the IP
address must be set in the same segment; otherwise, terminal and the switch must cross the router.
Meet the above three points you can use the Telnet command to log on to the switch, and then set the
switch.
1, the establishment of the environment, only the computer network port through the LAN and the network
port of the switch connection.
2, through the Telnet login the switch before you need to enter the
„ space + switch‟s IP‟ to verify.
(Figure 6.2.6.2)