3onedata IPS7112G-4GS-8GPOE Скачать руководство пользователя страница 28

Страница: 28 / 89

User manual

www.3onedata.com

Configuration

Items

Description

Port

Port name, corresponding to mark in panel.

Status

Display port connection whether or not

Medium

Display port type (optical interfaces and electrical interfaces).

Auto

negotiation

Auto-negotiation(AUTO),full duplex(FULL), half duplex(HALF)optional, default mode is

auto-negotiation mode.

Rate

Display configurable speed of port or auto-negotiation mode.

Flow Control

Whether selecting flow control to the port. Only can selecting flow control when the port

enable. The default is off.

Max-Frame

Display port transmission maximum frame length

Enable

Configurable ports enable or disable. Selecting square frame is for enable the
corresponding port. It cannot transmit data if any port disable. The default is “Enable”.

The described Electric port is the common network device RJ-45 port, commonly known as "crystal head",

it's is a twisted-pair Ethernet interface type. This interface can be used in 10Base-T, 100Base-Tx and

1000Base-Tx Ethernet, transmission media is twisted pair, but according to different bandwidth media

have different requirements, in particular, 1000Base-Tx Gigabit Ethernet connection, at least to use

cat5e.

Port Speed

Port speed shows the connecting speed of the port. It includes 3 kinds of speed: 10M, 100M and

auto-negotiation.

10M uses 10base-T standard and UTP cable for connection. When the port is in 10M speed, Link/Act

indicator will blink continuously while data transmitting and status indicator of 10M/100Mbps will stay

OFF.

100M uses 100Base-TX standard and UTP/STP cable for connection. When the port is in 100M speed,

Link/Act indicator will blink continuously while data transmitting. 100M fiber port uses 100Base-FX

standard and single/multi-mode fiber for connection. Main fiber of 100Base-FX standard includes: 62.5nm

multi-mode fiber and 50nm multi-mode fiber. Auto-negotiation includes 2 kinds of speed according the

capability of the other end: 10M and 100M.

Port Enable

This item provides a device to enable/disable the port. When choosing disable, the device would cut off

power supply of this port. Even if other device is connected to this port, all status indicators of this port are

OFF. Only enable this port, all settings about this port will be valid. This item provides a kind of safety

mechanism to protect the port from illegal use. It is not allowed to disable all the ports.

Duplex Mode

Содержание IPS7112G-4GS-8GPOE


























































































Результаты поиска

Содержание IPS7112G-4GS-8GPOE

Отзывы:

3onedata IPS7112G-4GS-8GPOE, Руководство пользователя, Страница: 28 / 89

Результаты поиска

Содержание IPS7112G-4GS-8GPOE

Отзывы: