Managed Industrial Ethernet Switch User Manual
3onedata proprietary and confidential 49
Copyright © 3onedata Co., Ltd.
Enter “Main Menu > System Management > Device Address”.
In the area of “reboot the device”, click “reboot”.
End.
Operation Step 2: creating chain
Configuring Device 105 and 106 in the following steps respectively.
Choose “Main Menu > Redundancy > Rapid Ring”.
In the “Settings” area of “Rapid Ring” page, choose “Ring V3” as “Protocol of
Redundancy”.
Check the “Enable” box in the “Group 1”.
In the “Settings” area of “Rapid Ring” page, set the “Type” to “Chain”.
In the “Settings” area of “Rapid Ring” page, set the “ID” to “2”.
Set “Port 1” to “02” and set “Port 2” to “03”.
The chain + single ring combination could be formed by using configured ring network port
of chain ring device to connect the normal port of single ring device.
Click “Apply”.
Enter “Main Menu > System Management > Device Address”.
In the area of “reboot the device”, click “reboot”.
End.
