Managed Industrial Ethernet Switch User Manual
3onedata proprietary and confidential 45
Copyright © 3onedata Co., Ltd.
Enter “1” into the “ID” textbox of “Group 1”.
Set “Port 1” and “Port 2” to “02” and “03” respectively.
Note:
“Port 1” and “Port 2” cannot be set to the same port.
Click “Apply”. Enter “Main Menu > System Management > Device Address”.
In the area of “reboot the device”, click “reboot”.
End.
Operation Step 2: configuring Ring 2 in WEB interface
Configuring Device 100, 101, 102, 103 and 104 in the following steps respectively.
Choose “Main Menu > Redundancy > Rapid Ring”.
In the “Settings” area of “Rapid Ring” page, choose “Ring V3” as “Protocol of
Redundancy”.
Check the “Enable” box in the “Group 1”.
Choose “Single” in the drop-down list of “Type” of “Group 1”.
