Managed Industrial Ethernet Switch User Manual
3onedata proprietary and confidential 28
Copyright © 3onedata Co., Ltd.
include Port 4 and Port 5. Therefore, a forwarding entry PVID4 is designed,
including Port 4 and Port 5. Configure the "Type" of Port 4 and Port 5 to U.
⚫
Port 5
Port 5 and Port 3, Port 4 can communicate with each other, Port 5 forwarding
entries include Port 3, Port 4. Therefore, design a forwarding entry PVID5,
including Port 3, Port 4. Configure the "Type" of Port 3 and Port 4 to U.
According to the forwarding entry analysis of Port 3, Port 4 and Port 5, forwarding
entry design picture as follows:
Operation Steps
Enter “Main Menu>Layer 2 Config>VLAN”.
Choose “IEEE 802.1Q VLAN” in the option box of “VLAN mode”.
Choose “Replace VID into default VID” in the option box of “VLAN frame control”.
In the “Default VID” area, enter 3, 4 and 5 respectly as the default VLAN “PVID” of
Port3, Port4 and Port5.
Enter 3 in “802.1Q VID” textbox.
In the drop-down list of “member type”:
1.
Set the member type of Port3 to U.
2.
Set the member type of Port5 to U.
Click “Add/edit” button to add VLAN entry to the “member list”.
Enter 4 in “802.1Q VID” textbox.
In the drop-down list of “member type”:
1.
Set the member type of Port4 to U.
2.
Set the member type of Port5 to U.
