Managed Industrial Ethernet Switch User Manual
3onedata proprietary and confidential 22
Copyright © 3onedata Co., Ltd.
Instance: bandwidth setting
For example: set both the egress and ingress bandwidth of Port 1 to
“4M”.
Operating steps
Enter “Main Menu > Port Configuration > Bandwidth Management”.
In “Bandwidth Configuration” area, click the option box of “Enable”.
In “Egress” area, choose “4M” as the egress speed of Port 1.
In “Ingress” area, choose “4M” as the ingress speed of Port 1.
Click “Apply”.
End.
⚫
Flow control should be enabled when using port speed limit, otherwise the speed
between devices would not be stable.
⚫
Unless flow control is disabled, the packet loss should not happen when using port
speed limit.
⚫
Port speed limit has high requirement on network cable quality, otherwise lots of
conflict packets and broken packet would appear.
