3M
Multimedia Projector MP8610
Disassembly/Reassembly
3M 1999
2-7
1
2
3
4
5
6
2-3-6.
Remove Interface Housing Assembly
To avoid electrical shocks, unplug projector
power cord before performing any maintenance
to electrical components.
To avoid burns to fingers, allow projector lamp
and internal projector components to cool off prior
to lamp removal or disassembly.
Remove the lens cover, top cover, lamp assembly, fan
plenum, and power supply.
1.
Remove two (2) interlocks.
2.
Remove three (3) screws from the interface housing
assembly cover.
3.
Remove the cover.
4.
Disconnect three (3) cable connectors.
5.
Slide the ribbon cable back and release the connector.
[gold tab side up for ribbon cable reassembly].
6.
Remove one (1) screw from the upper right corner of
the interface housing assembly.
!
Caution
!
WARNING
