3M
Multimedia Projector MP8610
Disassembly/Reassembly
3M 1999
2-5
4
1
2
3
7
6
5
2-3-4.
Remove Lamp Assembly
To avoid electrical shocks, unplug projector
power cord before performing any maintenance
to electrical components.
To avoid burns to fingers, allow projector lamp
and internal projector components to cool off prior
to lamp removal or disassembly.
Remove the lens cover, top cover, and fan plenum.
√√
Note
Use gloves when handling optical components to prevent
finger printing.
1.
Remove two (2) screws from the lamp housing cover
and remove cover. [Lamp cover is already removed in
photo].
2.
Remove the two (2) light shields by pulling them up
and out of the lamp assembly.
3.
Remove two (2) connectors from the power supply.
4.
Remove the ground wire.
5.
Remove four (4) torx head screws from the lamp
housing assembly base.
6.
Lift the wire harness to gain access to the assembly.
7.
Lift up and remove the lamp housing assembly.
8.
Reassemble in reverse order.
!
Caution
!
WARNING
