3M
Multimedia Projector MP8610
Adjustments
3M 1999
1-8
1-8-2.
Align the Lamp
1.
With the projector off, adjust the lamp up or down by turning the two adjustment screws mounted on springs
under the lamp socket.
If the arcs are too close, the lumen output will be reduced. If the arcs are to far apart the image uniformity will
be affected.
2.
Verify the lamp alignment by powering up the projector and viewing the image of the lamp on the screen by
holding a triplet lens in front of the projector lens.
3.
Repeat the above two steps until the lamp is aligned correctly.
