3M
Multimedia Projector MP8610
Troubleshooting
3M 1999
3-8
3-3-4.
Mouse Does Not Work
Probable causes are:
•
Loose cable.
•
Wrong connection.
•
Wrong power up sequence.
Possible solutions are:
•
The mouse emulation operates correctly only if the correct power up sequence has been used.
3-3-5.
Image Off Center
Probable causes are:
•
Image position
•
Center image with the arrow keys of the control panel or the disc pad on the remote control.
•
If vertical interference stripes occur, change the Tracking value in the Setup menu for optimum performance.
3-3-6.
Cannot Get Entire Image on the Screen
Probable causes are:
•
Wrong Tracking value.
•
Compatibility problem.
•
Wrong pixel setting.
Possible solutions are:
•
Refer to the documentation of your graphic card.
•
The projector supports the resolutions that can be found under Pixel in the Setup menu.
•
Adjust the Pixel setting in the Setup menu to the resolution of the video mode output from the computer
graphic card.
3-3-7.
Washed Out Image
Probable causes are:
•
Wrong Contrast setting.
•
Wrong Brightness setting.
Possible solutions are:
•
Change Contrast setting in the Setup menu. The bar should be in the middle position.
•
Lower Brightness setting in the Setup menu. Choosing Brightness and pressing Enter performs an automatic
adjustment.
