16
3M™ Multi-Touch Chassis Display User Guide
3M Touch Systems, Inc. Proprietary Information – TSD-45335
Note:
Given the variety of factors that can affect the use and performance of any
product, some of which are uniquely within the user’s knowledge and control, it is
essential that the user evaluate the specific gasket to determine whether it is suitable for a
particular purpose and suitable for the user’s intended application
NOTICE
To avoid the risk of potential damage to the display electronics:
•
Always use the VESA 400 mm mounting holes when using an arm attachment. Do
not drill additional holes in the unit to mount plates other locations
•
Do not use longer screws as they could potentially damage electronics inside the
display.
Access to the Video Controls
The C4267PW Multi-Touch Chassis Display has seven buttons for using the on-screen
menu and adjusting the video display. These controls are located on the side of the
Multi-Touch Chassis Display. These buttons let you display the on-screen menu and
adjust the phase, image position, contrast, and brightness. Make sure you will be able to
access the video controls once the C4267PW Multi-Touch Chassis Display is installed.
If enclosure space is tight and access is important, an on screen display remote control
(part number 98-1100-0330-2) is an option.
Clearance and Ventilation
Leave at least two inches of clearance space behind the C4267PW Multi-Touch Chassis
Display for proper ventilation. Units have vent holes at the top and bottom on the back of
the chassis -- ensure these holes are not blocked during installation. Always maintain
adequate ventilation to protect the display from overheating and to ensure reliable and
continued operation.
Note:
Be sure to leave at least 2 inches clearance around fan inputs.
Содержание Multi-Touch C4267PW
Страница 32: ......
