3M Multi-Touch C4267PW Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 45

3M Multi-Touch C4267PW Скачать руководство пользователя страница 44

44

3M™ Multi-Touch Chassis Display User Guide

3M Touch Systems, Inc. Proprietary Information – TSD-45335

AP PENDIX C

Regulatory Information

Regulatory Agency Approvals

Your product complies with the following regulatory standards:

•

FCC-B

•

CE

•

CCC

•

UL60950/IEC60950/EN60950 certified in compliance with the CB test scheme

This equipment has been tested and found to comply within limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in residential installations. This
equipment generates, uses and can radiate radio frequency energy, and if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause interference to radio or television
equipment reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:

•

Reorient or relocate the receiving antenna.

•

Move the equipment away from the receiver.

•

Consult the dealer or an experienced radio/television technician for additional
suggestions.

Note:

You are cautioned that any change or modification to the equipment not expressly

approved by the party responsible for compliance could void your warranty.

This Class B digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le
matériel brouilleur du Canada.

«
...
42
43
44
45
»

Содержание Multi-Touch C4267PW














































Отзывы:

Нет отзывов