3M Multi-Touch C4267PW Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 45

3M Multi-Touch C4267PW Скачать руководство пользователя страница 45

3M™ Multi-Touch Chassis Display User Guide

45

3M Touch Systems, Inc. Proprietary Information – TSD-45335

This device complies with Part 15 of the FCC rules: Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.

FCC Warning

To assure continued FCC compliance, the user must use the supplied grounded power
supply cord and the provided shielded video interface cable with bonded ferrite cores.
Also, any unauthorized changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this device.

3M Touch Systems is not responsible for any radio or television interference caused by
using other than recommended cables and connectors or by unauthorized changes or
modifications to this equipment.

CE Conformity for Europe

The device complies with the requirements of the EU RoHS Directive 2011/65/EU, the
ECC directive 2004/108/EC with regard to “Electromagnetic compatibility” and
2006/95/EC with regard to "Safety".

«
...
43
44
45

Содержание Multi-Touch C4267PW














































Отзывы:

Нет отзывов