3M Multi-Touch C4267PW, Руководство пользователя

Страница: 18 / 45

18 3M™ Multi-Touch Chassis Display User Guide
3M Touch Systems, Inc. Proprietary Information – TSD-45335
Configuring the Display Settings
After you connect your C4267PW Multi-Touch Chassis Display and turn on your
computer, you may need to configure one or more of these display settings. The ideal
setting for the C4267PW Multi-Touch Chassis Display is as follows:
•
Display mode (also called desktop area or video native resolution) 1920 x 1080
•
Refresh rate (also called vertical scan rate or vertical sync) 60 Hz
•
Color depth (also called color palette or number of colors) at least 16-bit (high color)
Adjusting the Multi-Touch Chassis Video Display
This section provides guidelines for adjusting the video display and using the display
controls to adjust the image to your liking. The controls for adjusting the video display
are located on the back of the Multi-Touch Chassis Display. These buttons let you
display the on-screen menu and adjust the phase, image position, contrast, and brightness.
Before you make any adjustments:
•
Be sure to adjust the controls in your normal lighting conditions.
•
Display a test image or pattern whenever you adjust the video.
On Screen Display
Your C4267PW Multi-Touch Chassis Display has seven controls for adjusting the video
display.
POWER SOURCE UP DOWN
+
-
MENU
•
Power -- Turns the display on and off.
•
Source -- Selects the applicable input source: VGA, HDMI, Display port, or DVI.
Settings are saved automatically.
•
Up -- Press to move among the menus and from the menu selection to specific
choices.
•
Down -- Press to move among the menus and from the menu selection to specific
choices.
•
+
(plus sign) -- Increases and decreases the volume.
•
- (minus sign) -- Press to decrease the volume.
•
Menu -- Shows or hides the onscreen display menu and acts as the Select key when
scrolling through menu options. Refer to Menu Navigation below for additional
information.
If you do not press any buttons, the display adjustment program times out (you can adjust
this time -- up to 30 seconds) and hides the menu options. You can press the Menu
button at any time to display the options again.