3M Multi-Touch C4267PW Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 45

3M Multi-Touch C4267PW Скачать руководство пользователя страница 10

10

3M™ Multi-Touch Chassis Display User Guide

3M Touch Systems, Inc. Proprietary Information – TSD-45335

Touch Sensor Care and Cleaning

The touch sensor requires very little maintenance. 3M Touch Systems recommends that
you periodically clean the glass touch sensor surface. Be sure to turn off your display
before cleaning.

Typically, an isopropyl alcohol and water solution ratio of 50:50 is the best cleaning
agent for your touch sensor.

CAUTION

To avoid the potentially hazardous situations associated with the use of alcohol
or other solvents used for cleaning display screen which may result in minor or
moderate injury or property damage:

•

Follow all instructions and recommendations in the manufacturer's Material Safety
Data Sheet and product label.

•

Be sure to follow solvent manufacturer's precautions and directions for use when
using any solvents

•

It is important to avoid using any caustic chemicals on the touch sensor. Apply the
cleaner with a soft, lint-free cloth. Avoid using gritty cloths.

•

Always dampen the cloth and then clean the sensor. Be sure to spray the cleaning
liquid onto the cloth, not the sensor, so that drips do not seep inside the display or
stain the bezel

.

3M Touch Systems Support Services

3M Touch Systems, Inc. provides extensive support services through our website and
technical support organization. Visit the 3M Touch Systems website at

http://www.3m.com/touch/

, where you can download MT 7 software and drivers, obtain

regularly updated technical documentation on 3M Touch Systems products, and learn
more about our company.

Whenever you contact Technical Support, please provide the following information:

«
...
8
9
10
11
12
...
»

Содержание Multi-Touch C4267PW














































Отзывы:

Нет отзывов