3M Multi-Touch C4267PW Скачать руководство пользователя | Manualshive

Страница: 29 / 45

background image

3M™ Multi-Touch Chassis Display User Guide

29

3M Touch Systems, Inc. Proprietary Information – TSD-45335

CH AP TE R 2

Enabling Your Multi-Touch Chassis Display

Windows® 7 USB Compatibility

3M Multi-Touch technology works seamlessly with the Windows® 7 operating system.
The Multi-Touch display supports USB HID for direct communication. The C4267PW
Multi-Touch Chassis Display leverages all the multi-touch functionality that is native to
Windows® 7. Plug the display into a system running Windows® 7 and you’ll quickly
enter the world of true multi-touch functionality.

The C4267PW Multi-Touch Chassis Display is compatible with Windows® 7 with no
additional software. Refer to Microsoft's Windows® 7 documentation for additional
information.

All Other Platforms

When using a Windows® 7 serial connection or for Windows® XP, Vista or Linux
operating systems (either USB or serial), 3M provides MicroTouch™ MT 7 Software for
multi-touch drivers. This guide includes information for writing your own drivers to
interface with the 3M Multi-Touch Technology.

Multi-Touch Application Support

Remember not all applications are multi-touch ready – Multi-touch behavior is a function
of YOUR application. Check with your application vendor to determine if your software
has multi-touch capability.

Installing 3M™ MicroTouch™ Software

Remember that Windows® 7 does not require any additional software to enable multi-
touch functionality.

However, for Windows® XP, Vista or Linux® operating systems, 3M™ MicroTouch™
Software enables your C4267PW Multi-Touch Chassis Display to work with your
computer. 3M™ MicroTouch™ Software includes a control panel for setting your touch
sensor preferences and a diagnostic utility. If you are experiencing problems with the
touch sensor, you can use the diagnostic utilities provided to test the system.

«
...
27
28
29
30
31
...
»

Содержание Multi-Touch C4267PW














































Отзывы:

Нет отзывов

Похожие инструкции для Multi-Touch C4267PW

732N - LCD Analog Display

Бренд: Samsung Страницы: 79

2243WM - SyncMaster - 22" LCD Monitor

Бренд: Samsung Страницы: 18

2233RZ - Syncmaster 22" 3D Gaming LCD Monito

Бренд: Samsung Страницы: 54

943BWX - SyncMaster - 19" LCD Monitor

Бренд: Samsung Страницы: 71

Бренд: Barco Страницы: 2

Бренд: Barco Страницы: 99

Бренд: Barco Страницы: 4

Бренд: Barco Страницы: 2

Бренд: Barco Страницы: 52

Бренд: ITI Страницы: 6

BeeConnect Plus 50120

Бренд: Reer Страницы: 64

KOT-0150US-SA4W

Бренд: K&JAD Technology Страницы: 19

Бренд: ViewSonic Страницы: 19

Бренд: CA.MI Страницы: 20

Бренд: Sencor Страницы: 14

Бренд: Eye Sight Technology Страницы: 4

Poly Medialign 65

Бренд: Plantronics Страницы: 157

Бренд: iBaby Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды