22
Version 1/2013
© Aroja s.r.o. 2013
www.3dfactories.com
On this picture you can see the low material and too big of retract, material is not properly set back on nozzle after
retract.
14.4. Retract
14.5. Model accuracy
Accuracy depend on filament diameter options and extrusion width. With this combination you can calibrate perfect
accuracy of the print result.
First time make test. Set value for extrusion with or let default and print test model. Measure this model and correct
the options for this two values.
14.6. Out of memory
32bit systems or only 32bit G3Dmaker on 64bit system can be out of memory with some bigger models or with small
model with high resolution.
This problem can solve only 64bit OS or decrease resolution of model (amount of polygons).
This parameter can have good or bar impact
on print result.
Like on the picture higher. Set the extra length
on restart. And decrease filament thickness in
material editor.
Too big value on Length and Extra length can
destroy the filament.
