12
Version 1/2013
© Aroja s.r.o. 2013
www.3dfactories.com
9.3 introductions of filament
a)
Insert the filament into the white tube (pic 9.3.1)
b)
Set temperature of extruder in control panel (1a).
Be sure that heater is on (2a)
c)
Set speed on 100 ad length 50-100.
d)
After temperature is reached, press forward
button and put filament into the extruder (pic
9.3.2) be sure that filament is going between
wheels and is going into the small hole under
wheels (pic 9.3.3)
e)
Wait for extrusion is started.
2a
1a
Pic 9.3.1
Pic 9.3.3
Pic 9.3.2
Filament
between
wheels
Small hole under
wheels
Insert filament here
End of filament has to be flat!!!
