16
Version 1/2013
© Aroja s.r.o. 2013
www.3dfactories.com
Skirt is for properly extrusion start
Brim for hold small models on platform
Set your desired print options and press “Generate G-code” . After generation press “print button.
12.
ADVANCED PRINTING SETTINGS
12.1. Common settings
Click on icon for open setting window.
Select layer thickness:
the options bellow these
fields are managed by these options. For each
layer thickness separately.
First layer height
: first layer can start on 100% of
layer thickness or higher or lower.
For 0.08
thicknesses
would be better to decrease this
number for example 50%. Other let 100%.
Retract
Speed (mm/s):
speed for pull filament back to
prevent oozing. Good parameter is 300-500 mm/s.
Length (mm):
Length of filament pulled back.
Good is between 1-2.5.
Lift Z (mm):
Table is going down this length during
retract. This parameter improve print surface and
prevent break the model.
BRIM
SKIRT
