3D Systems, Inc.
5
p/n 76-D022 Rev. A
This section lists all required and optional components for the ProX
®
SLS 6100 3D Printer System . These include:
•
ProX
®
SLS 6100 3D Printer
•
SLS Single MQC System
•
Auxiliary equipment for finishing parts created with the ProX
®
SLS 6100
•
Maintenance and safety equipment for cleaning the system and protecting operators and service personnel
•
Items consumed during part printing “consumables” such as powder, nitrogen, and filters
NOTE: The ProX
®
SLS 6100 3D Printer prints many types of parts out of several types of SLS materials . Each
application has some unique requirements . Your system will most likely
not
include every component and
material listed in this section . Just focus on the components and materials included in your order .
It is especially important that you prepare your facility for all non-3D Systems-supplied components in your order . These are
indicated in each section . The facilities for these non-3D Systems-supplied components—and in some cases the components
themselves—must be in place before the ProX
®
SLS 6100, SLS Single MQC System, and any auxiliary equipment from 3D
Systems can be installed .
REQUIRED SYSTEM COMPONENTS
Your ProX
®
SLS 6100 must include the components described below . Most of these components are 3D Systems supplied and
installed; others can be one of the following:
•
Customer-supplied and supplier-installed
•
Customer-supplied and 3D Systems installed
NOTE: Contact 3D Systems Customer Support if you need help reaching a supplier .
When a required system component can be customer-supplied, the source (or sources) for the component are listed, along with
purchasing information .
All required system components are listed below . Each component is detailed separately in the sections that follow .
•
ProX
®
SLS 6100 3D Printer
•
SLS Single/Double MQC System
•
Nitrogen Generator or a comparable Nitrogen source
•
Vacuum Cleaner
•
Dust Extractor
•
ProX
®
SLS 6100 Transformer
3
WHAT YOUR SYSTEM INCLUDES