3D Systems, Inc.
15
p/n 76-D022 Rev. A
Refer to the ProX
®
SLS 6100 3D Printer Facility Requirements Poster for a visual layout of the room requirements .
CLEARANCE REQUIREMENTS – ProX
®
SLS 6100 STATION
MINIMUM CLEARANCE
WIDTH
DEPTH
HEIGHT
Room
427 cm (14 ft)
366 cm (12 ft)
305 cm (10 ft)
Access door
1
191 cm (6 .25 ft)
--
244 cm (8 ft)
1 . The process station is 230 cm (7 .5 ft) tall and 175 cm (5 .75 ft) wide, but extra clearance is needed if it is on a pallet .
CLEARANCE REQUIREMENTS – SLS SINGLE MQC SYSTEM
MINIMUM CLEARANCE
WIDTH
DEPTH
HEIGHT
Room
481 cm (16 ft)
427 cm (14 ft)
305 cm (10 ft)
Access door
1
290 cm (9 .5 ft)
--
260 cm (8 .5 ft)
1 . The SLS Single MQC System is 244 cm (8 ft) tall and 275 cm (9 ft) wide, but extra clearance is needed if it is on a pallet .
FLOOR REQUIREMENTS
REQUIREMENTS
COMMENTS
Vibration-free
Required
First floor installation
Preferred
Level and flatness
within 25 .4 mm (1 in) below the printer
Distributed load-bearing capacity
•
The
weight
of the ProX 6100 process station is
1361 kg (3000 lbs)
. The weight of the
station is distributed on four 68 mm (2 .7 in) diameter pads .
•
This is an
area of 3631 mm
2
(5 .628 in
2
) per pad
.
The
total area
for all four pads is
1,427 mm
2
(2 .212 in
2
)
•
Each pad
receives
903 kPa (131 psi, 0 .0937 kg/mm
2
)
7
ROOM REQUIREMENTS