3D Systems, Inc.
10
p/n 76-D022 Rev. A
ProX
®
SLS 6100 Transformer
Supplied by
: 3D Systems or customer
Installed by
: Supplier (prior to ProX
®
SLS 6100 SLS 3D Printer installation)
A customer-supplied step-up or step-down transformer is required if the facility does not have 208 VAC, 3-phase, 50/60 Hz, 10
kVA power .
There are two U .S . models and one E .U . model available for purchase from 3D Systems:
US Transformers:
•
230-250 Volt to 208VAC, 10kVA, 60Hz, 3PH
•
460-500 Volt to 208VAC, 10kVA, 60Hz, 3PH
EU Transformer
•
385-415 Volt to 208VAC, 10kVA, 50Hz, 3PH
Dust Extractor
Supplied by
: 3D Systems or customer
Installed by
: Supplier (3D Systems or customer)
The Dust Extractor, 230VAC, 60Hz, 3PH and 400VAC, 50Hz, 3PH draws
airborne powder out of the MQC System during part breakout through
a flexible vacuum duct and collects airborne powder in the internal
dust drawer for disposal . It is recommended that the Dust Extractor be
situated at the rear-right of the
SLS Single MQC System
, but it is possi-
ble to locate it as much as 50 meters away .
Vacuum Cleaner
Supplied by
: 3D Systems or customer
Installed by
: Supplier (3D Systems or customer)
The Nilfisk S2 Industrial Single Phase Vacuum Cleaner, 120V, 60Hz, 1Ph, is
recommended for SLS facility maintenance . It is used to clean the process station and
MQC System between prints .
Explosion-proof and international versions are also available . Contact 3D Customer
Service for purchasing options .