3D Systems, Inc.
1
p/n 76-D022 Rev. A
Use this guide to help you prepare your facility for installation of the:
•
ProX
®
SLS 6100 3D Printer
•
SLS Single MQC System
•
Auxiliary equipment for finishing parts created with the ProX
®
SLS 6100
This guide gives you the information and guidance you need to complete the Facility Requirements Checklist - ProX
®
SLS 6100
3D Printer and Auxiliary Equipment . You must complete this checklist and send it to 3D Systems when you’re ready to have your
equipment installed .
At the back of this guide, you will find the ProX
®
SLS 6100 Facility Poster
which gives you a layout view of the facility
requirements for the ProX
®
SLS 6100 3D Printer, SLS Single MQC System, and auxiliary equipment .
SAFETY PRECAUTIONS
Please review all safety information in the
Safety Guidelines and Instructions
section of the
ProX SLS 6100 User Guide
.
The conditions in which the printer is crated, stored, transported, and un-crated, are covered in this Facility Guide,
available to the user . This guide contains a described sequence for crating, re-crating, and transport . Details on lifting,
moving, and storage are also provided .
CAUTION: After you receive your equipment, do not allow anyone to connect electrical power, compressed air, or
nitrogen to any of these devices. This must only be done by your 3D Systems-certified Customer Support Engineer
(3D CSE) during installation.
Attempts to install equipment or auxiliary equipment by non-3D Systems-certified personnel could void the warranty
and result in serious injury and equipment damage.
The weight and size of the machine (Section 12: Shipping Weights and Dimensions) should be considered
at all times: during use, transportation, assembly, dismantling when out of service, testing or foreseeable
breakdowns . By following the safety and facility requirements detailed in this guide, the stability of the printer
does not require additional definition(s) outside the contents of this guide.
1
HOW TO PREPARE FOR INSTALLATION