3D Systems, Inc.
13
p/n 76-D022 Rev. A
In the sections that follow, you will find all of the requirements your facility must meet before your ProX
®
SLS 6100 3D Printing
System can be installed . After your facility meets these requirements, please complete and sign the Facility Requirements
Checklist and submit to 3D Systems Technical Support for review .
When Technical Support receives your completed checklist, a 3D Systems representative will contact you to verify your facility’s
readiness. When the representative is confident that all facility requirements are met, he or she will schedule a trip to your site
to install the ProX
®
SLS 6100 3D Printer and any additional SLS equipment which was ordered .
NOTE: All facility requirements must be met before 3D Systems Technical Support can schedule a trip to your
facility to install the SLS equipment .
ABOUT THE CHECKLIST
Each facility feature on the checklist is covered in the subsequent “requirements” sections of this guide . Each of these sections
lists the specific requirements for a facility feature and any instructions you need to meet them. In some cases, you must refer
to the
ProX® SLS 6100 3D Printer Facility Requirements Poster
, for example, when you lay out the room or wire electrical
power . The instructions tell you when you need to refer to this drawing .
•
After your facility meets all the requirements for a section, check off that section on the
Facility Requirements Checklist
.
•
If you have any questions regarding facility requirements, contact your 3D Systems Sales representative or 3D Systems Technical
Support.
HOW TO SUBMIT YOUR COMPLETED FACILITIES CHECKLIST
Submit your completed Facility Requirements Checklist by fax, mail, or email to one of the 3D Systems Technical Support sites
below. This notifies them that your facility is fully prepared for installation.
COMMUNICATIONS FORMAT
NORTH & SOUTH AMERICA; ASIA PACIFIC
EUROPE
Fax
+1 512-339-0634
attn: SLS Customer Support
+49 6151 357 355
attn: SLS Customer Support
3D Systems Corporation
333 Three D Systems Circle
Rock Hill, SC 29730
attn: SLS Customer Support
3D Systems GmbH
Rontgenstrasse 41
D-64291 Darmstadt,
Germany
attn: SLS Customer Support
support@3dsystems .com
support@3dsystems .com
Be sure to include the date that you submitted your completed checklist so installation can be scheduled as quickly as possible .
If you need to speak to a 3D Systems Technical Support representative about your facility requirements, call:
•
1.888.598.1438 (U.S.)
•
(+49) 6151.357-0 (Europe)
•
(+852) 29.23.50.77 (Asia Pacific)
6
FACILITY REQUIREMENTS CHECKLIST