3D Systems ProX DMP 300 Скачать руководство пользователя страница 60

Страница: 60 / 102

3D SYSTEMS, INC

PN:80-D27 Rev.B

•

Monitoring tab

Oxygen, enclosure temperature, external scannerhead temperature and enclosure pressure are traced and stored on a

tracking file. Each time a new job starts in automatic mode (see section "Manufacturing menu" on page 47), a monitoring

file is created. As long as a monitoring file is existing on the printer, it can be viewed and exported.
When the job is complete, its monitoring file is closed.

The format of the monitoring file is ".xml", and is composed by:

NameOfFABFile_Monitoring_Date(Day_Month_Year)_Time(Hour_

Minute_Second)

1 .

Click on the "Open file" button to open a

monitoring file (1).

2 .

Select the desired monitoring file from the list.

3 . The recordings will be indicated on the

information area (2), and grouped within

corresponding tab (3) .

4 . Optional: to export individually each recording

("csv" or "xml" formats), click on the "Export"

button (4) . The selected tab will then be

exported on the location you have specified.

5 .

Optional: to export all trackings files ("csv"

format), click on the "Export" button (4) . The

tracking files existing on the printer will then be

exported on the location you have specified.

When starting a purge, a similar tracking file is automatically created. The name of the corresponding

tracking file is similar, apart from the

NameOfFABFile

which is replaced by

Purge

•

Event viewer tab

This tab displayes all the operations done on the

machine (1), even if there is no plate loaded .
By default, only the events of the current month

are displayed . Use the arrows buttons (2) to

display the events occure previously .

To lighten the display, use the filters (3) according:

•

Event type (Information, Warnings or

Errors) .

•

Operation type (Preparation,

Manufacturing, Action) .

•

Date .

When an event is selected, the corresponding details can be

displayed by clicking on the

button . Click on "Quit" to close

the Event details .

Содержание ProX DMP 300






































































































Результаты поиска

Содержание ProX DMP 300

Отзывы:

3D Systems ProX DMP 300, Руководство пользователя, Страница: 60 / 102

Результаты поиска

Содержание ProX DMP 300

Отзывы: